New Site Home Page
  Old Site Home Page
  Field Service
  High Voltage Construction
Services
  Preventive & Predictive   Maintenance
  Qualifications
  Safety
  Plant Life Cycle Services
  Engineering Services
  Shutdowns & Turnarounds
  Shop Service
  Emergency Response Services
  Contact Us
  Careers
  Formulas
 

SABER Power Services
9841 Saber Power Ln
Rosharon Texas 77583
Ph: 713-222-9102
Fax: 713-236-8386
Email: info@saberpower.com  
 
 

Technical Support
Electrical Field Service - For help with any Maintenance, Testing, Repair, Design or Engineering questions - 713-222-9102
 

Emergency Electrical Services
 
 
This page has moved. Click Here to visit our new site
 
 

Safety

 
  Safe work practices and environments are critical to SABER. We have safety committees and safety officers at both the Management and Technician levels. We maintain detailed safety records on each and every job and evaluate safety procedures regularly.

We place great importance on accident prevention and our people have a great history for working safely. The degree of safety and the results accomplished are directly proportional to the effort expended to control conditions, practices and human actions that lead to accidents.



Safety Program


Following are the major components of our Safety Program:
- Safety Manual
- Safety Culture
- Training and Retraining
- Safety Equipment
- Safety Meetings
- Safety Records
- Safety Compliance

SABER conducts on-going safety audits to determine that each employee is complying with the mandatory safety-related work practices
 
 

Industry Associations

 
  SABER participates in national and international standards associations such as:
- The National Fire Protection Association (NFPA)
- The American National Standards Institure (ANSI)
- The Institute of Electrical and Electronics Engineers (IEEE).
 
 
 

Arc Flash Solutions

 
  Are you compliant?
Arc Flash is a serious hazard with potentially devastating effects. Ensuring worker safety and meeting the challenges of the new arc flash safety requirements can be a difficult task.
Trust Saber's experience to deliver the most complete solutions for arc flash compliance. From hazard analysis and labeling to personal protective equipment and training, Saber's electrical service team is your source to reduce your risk, supply the industry's best safety programs, and ensure regulatory compliance.

Whether you require a complete program or short-term assistance with arc flash calculations, Saber has a solution to fit your needs. Select from our menu of services for Arc Flash Solutions.
 
 
 

Arc Flash Hazard Analysis (Study)

 
  The National Fire Protection Association Guidelines (NFPA 70E) require facility owners to perform an arc flash hazard analysis prior to allowing a worker to perform a task on energized equipment. The arc flash analysis identifies the presence and location of potential hazards and provides recommendations for PPE, boundaries for limited, restricted and prohibited approaches, recommendations for flash protection, and safe work practices.  
 
 

Arc Flash Hazard Labeling Plan

 
  Electrical inspectors are now enforcing the new labeling requirement published in the National Electrical Code (NEC 110.16) that states a warning label must be placed on electrical equipment that may remain energized during maintenance or repair. Saber can assist with compliance during each phase of an arc flash hazard analysis. In the initial phase, Saber supplies the labels and can also assist in applying the appropriate warning labels and signs.  
 
 

Arc Flash Hazard Labeling Plan

 
  Electrical inspectors are now enforcing the new labeling requirement published in the National Electrical Code (NEC 110.16) that states a warning label must be placed on electrical equipment that may remain energized during maintenance or repair. Saber can assist with compliance during each phase of an arc flash hazard analysis. In the initial phase, Saber supplies the labels and can also assist in applying the appropriate warning labels and signs.  
 
 

Site Review / Compliance Assessment

 
  The Occupational Health and Safety Administration (OSHA) is diligent in enforcing the NFPA 70E Guidelines. To ensure compliance Saber can determine the necessary steps to fulfill the more general statements in the OSHA standards. We conduct a comprehensive assessment at your facility to identify areas of risk and non-compliance. A plan is then formulated to bring your facility into compliance in the most efficient way possible.  
 
 

Design Review

 
  Saber's technical staff can conduct a design review of your electrical distribution system to identify areas to reduce potential arc flash hazards. Several areas are evaluated including fault levels, exposure times, remote operations, remote racking, and system grounding. Employing special devices and altering current design can significantly reduce fault levels, arcing time, arc incident energy, and arc blast force. Conducting a design review is the most effective way to uncover potential hazards so these types of solutions can be employed.  
 
 

Single-Line Diagrams

 
  NFPA 70E requirements mandate accurate, up-to-date single-line diagrams. These documents are essential for documenting, troubleshooting, and communicating information about your power systems. To meet these requirements, Saber can conduct a comprehensive site survey that is essential to develop or to update existing single-line diagrams or complete electrical system drawings.  
 
 

Short Circuit and Coordination Studies

 
  The Petroleum and Chemical Industry Committee (PCIC) recommend that Arc Flash calculations be completed in conjunction with short circuit calculations and protective device coordination to achieve the most accurate Arc Flash Hazard results. Short circuit and coordination studies verify protective devices and arc hazard ratings, calculate momentary interrupting and relay currents, establish settings for all types of protective devices, and coordinate your entire power distribution system to minimize downtime. Saber specializes in conducting these studies that provide vital information you need to ensure compliance with NFPA and OSHA requirements.  
 
 

Preventive Maintenance

 
  Saber can assist in developing a preventive maintenance program to specifically address arc flash hazards. Our optimized preventive maintenance program evaluates the equipment's condition and determines the most cost-effective and manageable solution to ensure your protective devices operate properly, safely, and reliably eliminating prolonged exposure to arc flash, which could result in disabling injuries or death.  
 
 

Electrical Safety Program Review / Development

 
  NFPA 70E requires every facility to establish an electrical safety program. Saber can assist in reviewing or developing a comprehensive electrical safety program that supports an overall site safety program. An effective program should include a certified training program, knowledge of electrical hazards and self-discipline of employees. It should also identify hazard/risk evaluation procedures, electrically safe work procedures, tools and PPE, and electrical safety principles particularly safety by design. We have gone a step further to recognize positive Safety Behaviors as they occur with rewards and recognition program for all of our employees, including our warehouse and office workers, who are also charged with working safely every day.  
 
 

Training

 
  An effective arc flash training program should provide workers the knowledge and understanding of the existence, nature, causes, and methods to prevent electrical hazards. Saber's arc flash training program includes training on arc flash awareness, standards and codes, understanding of arc flash quantities, selection and use of appropriate PPE, reading and following warning signs and labels, methods to reduce risk while working on live exposed parts, arc flash hazard assessment, and documentation.  
 
 

Personal Protective Equipment Plan

 
  Saber's Personal Protective Equipment Plan addresses all OSHA standards regarding PPE to ensure compliance. Based on the findings of the arc flash analysis, Saber will provide PPE category requirement and recommendations. We can also assist in the selection and supply of recommended equipment on which workers will be trained. Our team will address when the PPE is necessary and what equipment is required. Saber's approach covers how PPE should be worn, maintained, and disposed of after the equipment life has expired.  
 
 

Documentation

 
  Proper documentation ensures compliance with OSHA and NFPA standards and facilitates investigation should an arc flash related injury take place. Thorough documentation is one of Saber's strengths. Our arc flash compliance plan consists of a customized written report that includes the result of the arc flash analysis, updated single-line drawings on electrical systems, signs and labels on equipment and hazardous areas. Also included in the documentation are the type, name/ID, incident energy at working distances, flash protection boundary, hazard/risk category, and other pertinent information such as voltage, available fault current, protective device description and its trip time, arc gap, and current. Documentation can also be provided as part of the safety program and documentation of training provided to workers.
Our managers, field technicians and engineers are active in the industry to advance the field of engineering and reliability management.
 
     
 
 
Home | Careers | Contact us Copyright 2011 - Saber Power Services, LLC - All Rights Reserved.